-
Project Completion 90%
-
Professionalism 90%
-
Experience 88%
-
Price-friendly 85%
Adding a gas range, moving to a gas dryer, running a line to an outdoor grill, or wiring up a standby generator all start the same way: someone has to run pipe from the meter or an existing branch to the new appliance. Homeowners in Columbus usually discover the cost isn’t the pipe. It’s the distance, the route, and whether the existing system has capacity left.
Simple interior runs price at $15 to $25 per linear foot installed. Complex work, trenching, slab penetration, and multiple turns push that to $35 to $50 or more. A 10-foot tie-in to an appliance near an existing line might be $150 to $250; a 30-foot range hookup runs around $600; a 60-foot buried line to a detached garage or generator can hit $3,000 once excavation, backfill, and tracer wire are added. Most residential projects in Columbus land between $600 and $2,200.
This is not DIY territory anywhere. Nearly every jurisdiction requires a licensed plumber or gasfitter plus a permit and inspection, and skipping that can void homeowners insurance on top of the obvious risk. The technical work is sizing: your installer calculates total BTU demand across every appliance that might run at once, then picks pipe diameter for the longest run. An undersized line starves appliances, produces yellow flames, and can generate carbon monoxide. Permits run $100 to $300, and a pressure test adds $75 to $150.
Below you’ll find licensed plumbers and gasfitters in Columbus handling gas line installation, extensions, appliance hookups, relocations, and underground runs. If you smell gas at any point, leave the house first, don’t touch switches or use a phone inside, and call 911 or the gas utility from outside. Compare licensing, reviews, and quotes, and plan every future drop now; adding a second line while the crew is already onsite costs far less than a separate trip.
Gas Line Installation Services In Columbus
Based on our criteria
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
What is the overall customer analysis in August?
The single review provided is highly positive and mentions all four dimensions: responsiveness and straightforward communication (professionalism), reasonable and accurate quote (pricing), completion of multiple issues in one day with quality workmanship (project completion and experience). However, with only one review, the WW Score cannot be reliably calculated per methodology requirements. The ... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
-
Professionalism 90%
-
Experience 88%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only one review was provided. While this single review is positive and mentions professionalism (professional attitude, attention to detail with triple-checking), project completion (work finished, cleanup performed), and experience (quality workmanship matching existing plumbing), a single data point cannot support a reliable WW Score. Prici... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only one review was analyzed. The single review mentions project completion positively (main line jetting completed, customer satisfied enough to return), but provides no explicit detail on professionalism, pricing, or technical experience. The statement 'I don't have any complaints' is absence of criticism, not evidence of quality across dim... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 95%
-
Professionalism 95%
-
Price-friendly 90%
What is the overall customer analysis in August?
This single review provides explicit positive evidence across three dimensions: professionalism (on-time arrival, friendly demeanor, professional conduct), pricing (transparent cost options, pricing in line with estimate), and project completion (work completed same day as promised). However, with only one review, the WW Score cannot be calculated reliably per protocol. The review contains no spec... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
-
Professionalism 90%
-
Experience 85%
-
Price-friendly 85%
What is the overall customer analysis in August?
Insufficient data — only 1 review analyzed. While this single review is positive and mentions all four dimensions (punctuality/honesty in professionalism, fair pricing, follow-through on appointments, and technical knowledge), a WW Score cannot be reliably calculated from a single data point. The review explicitly praises honest quotes, on-time arrival, knowledge, and ease of working with the cont... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 8%
-
Professionalism 12%
-
Experience 10%
-
Price-friendly 15%
What is the overall customer analysis in August?
The single review analyzed is a detailed, highly negative account from a customer whose brand-new plumbing installation failed repeatedly within a few years of completion. Professionalism scored very low due to the contractor's lack of an emergency line, failure to return calls, and poor communication. Pricing scored very low because the customer was billed over $600 for repairs to what should hav... Read more
Score last updated August 2026
Frequently Asked Questions
How much does gas line installation cost?
Simple interior runs cost $15 to $25 per linear foot installed; complex runs with trenching, turns, or slab penetration go from $35 to $50 or more. Most residential projects total $600 to $2,200, with a national average near $1,000. Permits add $100 to $300, and a pressure test $75 to $150. Trenching runs $5 to $15 per foot on top. Quotes fall inside these ranges, though labor rates vary by market. Appliance fittings like shutoffs and sediment traps add $50 to $200.
Do I need a permit for a gas line?
Almost certainly yes. Nearly every jurisdiction requires a permit and inspection for new or extended gas piping, and many restrict the work to a licensed plumber or gasfitter. Permits run $100 to $300. Inspectors verify pipe size, material, supports, shutoffs, and bonding, then require a pressure test typically at least 3 psi held with no drop for 10 to 15 minutes. Confirm requirements with the building department, and let your installer pull the permit rather than doing it yourself.
Can I install a gas line myself?
No, and in most places it isn’t legal without a license. Gas work is the one plumbing job where a mistake means fire, explosion, or carbon monoxide poisoning rather than a callback. Unpermitted DIY gas piping also fails inspection, complicates a future home sale, and can void your homeowners policy after a loss. Even experienced DIYers hand this one off. Hire a licensed plumber or gasfitter and confirm both the license number and insurance before any work starts.
How is gas line size determined?
By total BTU demand and the length of the longest run. Your installer adds up the input rating on every appliance that could operate the furnace, water heater, range, dryer, grill, converts that to cubic feet per hour, then reads a sizing chart from the National Fuel Gas Code for the required diameter. Undersized pipe causes low flame, yellow burners, and delayed ignition. Tell your installer about future appliances so the line is sized with headroom from the start.
Black iron or CSST which pipe should I use?
Black iron costs less in material at roughly $2 to $4 per foot but takes far more labor to cut, thread, and fit, so it usually wins on short, straight runs. CSST, the yellow flexible tubing, costs more per foot but installs three to five times faster through existing walls and joist bays, which makes it cheaper on long or awkward routes. CSST also requires proper bonding. Installers will recommend one based on your specific route and access.
How long does gas line installation take?
A short interior tie-in near an existing line takes two to four hours, which is also the typical minimum call-out for a licensed gasfitter. A 30-foot run through finished walls takes most of a day once drilling and patching are counted. Underground work stretches to several days with trenching, inspection before backfill, and restoration. Permit review happens before any of that, so ask about the full schedule, not just the install day, when you book. Drywall patching is usually a separate trade.
What should I do if I smell gas?
Leave immediately. Don’t flip light switches, unplug anything, or use a phone inside; a spark is all it takes. Get everyone and pets out, leave the door open if you can do it quickly, and call 911 or the gas utility from a neighbor’s house or the street. Don’t go back in until the utility clears it. Once the emergency is handled, a licensed plumber can pressure-test the system and repair the leak before service is restored.
