-
Professionalism 85%
Adding a gas range, moving to a gas dryer, running a line to an outdoor grill, or wiring up a standby generator all start the same way: someone has to run pipe from the meter or an existing branch to the new appliance. Homeowners in Columbus usually discover the cost isn’t the pipe. It’s the distance, the route, and whether the existing system has capacity left.
Simple interior runs price at $15 to $25 per linear foot installed. Complex work, trenching, slab penetration, and multiple turns push that to $35 to $50 or more. A 10-foot tie-in to an appliance near an existing line might be $150 to $250; a 30-foot range hookup runs around $600; a 60-foot buried line to a detached garage or generator can hit $3,000 once excavation, backfill, and tracer wire are added. Most residential projects in Columbus land between $600 and $2,200.
This is not DIY territory anywhere. Nearly every jurisdiction requires a licensed plumber or gasfitter plus a permit and inspection, and skipping that can void homeowners insurance on top of the obvious risk. The technical work is sizing: your installer calculates total BTU demand across every appliance that might run at once, then picks pipe diameter for the longest run. An undersized line starves appliances, produces yellow flames, and can generate carbon monoxide. Permits run $100 to $300, and a pressure test adds $75 to $150.
Below you’ll find licensed plumbers and gasfitters in Columbus handling gas line installation, extensions, appliance hookups, relocations, and underground runs. If you smell gas at any point, leave the house first, don’t touch switches or use a phone inside, and call 911 or the gas utility from outside. Compare licensing, reviews, and quotes, and plan every future drop now; adding a second line while the crew is already onsite costs far less than a separate trip.
Gas Line Installation Services In Columbus
Based on our criteria
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
What is the overall customer analysis in August?
Insufficient data — only 1 review analyzed. The single review mentions politeness and efficiency (professionalism dimension), but provides no information about pricing, project completion, or technical experience. No WW Score can be reliably calculated with fewer than 3 reviews.... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 95%
-
Professionalism 92%
-
Experience 90%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only 1 review was analyzed. The single review praises JDM's professionalism (efficient, no upselling, good communication), project completion (work completed quickly and thoroughly), and experience (provided advice, demonstrated technical knowledge). However, pricing is not mentioned. A minimum of 3 reviews is required to produce a statistica... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 95%
-
Professionalism 95%
-
Price-friendly 90%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only 1 review was analyzed. While this single review is highly positive and mentions professionalism (punctuality, communication, professional demeanor), pricing (fair adjustment to quote), and project completion (completed in one call with expanded scope), a reliable WW Score requires a minimum of 3 reviews. All scores shown are based on LIM... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
-
Professionalism 90%
-
Experience 85%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only 1 review was analyzed. The single review explicitly mentions professionalism (punctuality, keeping appointments), project completion (job done well), and experience (excellent work quality). However, pricing is not addressed. With only one data point, confidence in any dimension is severely limited and cannot support a reliable overall W... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
-
Professionalism 85%
-
Experience 90%
What is the overall customer analysis in August?
Only one review was available for analysis, which is insufficient to calculate a reliable WW Score. The single review praises the contractor's reliability, collaborative approach, and quality of work across multiple service areas (electrical, plumbing, remodeling). However, with only one data point and no explicit mention of pricing or detailed project completion specifics, confidence in any dimen... Read more
Score last updated August 2026
Workman Score
0.0 /100
Based on
1 reviews analyzed
Yelp
-
Project Completion 85%
-
Experience 90%
What is the overall customer analysis in August?
Insufficient Data — cannot calculate WW Score reliably. Only one review was provided. The review mentions extensive experience with custom glass installations and successful project completion across multiple complex projects, but does not address professionalism dimensions (punctuality, communication, attitude) or pricing. A single review, particularly one from a business referral source, cannot ... Read more
Score last updated August 2026
Frequently Asked Questions
How much does gas line installation cost?
Simple interior runs cost $15 to $25 per linear foot installed; complex runs with trenching, turns, or slab penetration go from $35 to $50 or more. Most residential projects total $600 to $2,200, with a national average near $1,000. Permits add $100 to $300, and a pressure test $75 to $150. Trenching runs $5 to $15 per foot on top. Quotes fall inside these ranges, though labor rates vary by market. Appliance fittings like shutoffs and sediment traps add $50 to $200.
Do I need a permit for a gas line?
Almost certainly yes. Nearly every jurisdiction requires a permit and inspection for new or extended gas piping, and many restrict the work to a licensed plumber or gasfitter. Permits run $100 to $300. Inspectors verify pipe size, material, supports, shutoffs, and bonding, then require a pressure test typically at least 3 psi held with no drop for 10 to 15 minutes. Confirm requirements with the building department, and let your installer pull the permit rather than doing it yourself.
Can I install a gas line myself?
No, and in most places it isn’t legal without a license. Gas work is the one plumbing job where a mistake means fire, explosion, or carbon monoxide poisoning rather than a callback. Unpermitted DIY gas piping also fails inspection, complicates a future home sale, and can void your homeowners policy after a loss. Even experienced DIYers hand this one off. Hire a licensed plumber or gasfitter and confirm both the license number and insurance before any work starts.
How is gas line size determined?
By total BTU demand and the length of the longest run. Your installer adds up the input rating on every appliance that could operate the furnace, water heater, range, dryer, grill, converts that to cubic feet per hour, then reads a sizing chart from the National Fuel Gas Code for the required diameter. Undersized pipe causes low flame, yellow burners, and delayed ignition. Tell your installer about future appliances so the line is sized with headroom from the start.
Black iron or CSST which pipe should I use?
Black iron costs less in material at roughly $2 to $4 per foot but takes far more labor to cut, thread, and fit, so it usually wins on short, straight runs. CSST, the yellow flexible tubing, costs more per foot but installs three to five times faster through existing walls and joist bays, which makes it cheaper on long or awkward routes. CSST also requires proper bonding. Installers will recommend one based on your specific route and access.
How long does gas line installation take?
A short interior tie-in near an existing line takes two to four hours, which is also the typical minimum call-out for a licensed gasfitter. A 30-foot run through finished walls takes most of a day once drilling and patching are counted. Underground work stretches to several days with trenching, inspection before backfill, and restoration. Permit review happens before any of that, so ask about the full schedule, not just the install day, when you book. Drywall patching is usually a separate trade.
What should I do if I smell gas?
Leave immediately. Don’t flip light switches, unplug anything, or use a phone inside; a spark is all it takes. Get everyone and pets out, leave the door open if you can do it quickly, and call 911 or the gas utility from a neighbor’s house or the street. Don’t go back in until the utility clears it. Once the emergency is handled, a licensed plumber can pressure-test the system and repair the leak before service is restored.
